My first “passage”

log: 246nm
engine: 393,3h
Location: Heiligenhafen, Germany

With around 36nm (66km) my first passage might also be the longest of the trip. At least it was the longest stretch of open water I “had to” pass. Why not just hug the shore you might ask? Well, our friends from the German navy are protecting our freedom just here by celebrating fireworks every f*cking day from 9-17h. At least in the summer season, they do less shooting when the weather gets crappy. And they don’t shoot on weekends, but the lack of wind crossed that on off my list of possibilities. So my beloved government is wasting my tax money and forcing me to take a detour at the same time. They post their shooting schedule on the interwebs. They announce it via radio. There are signs in the harbours around which show the times. There “traffic light” kind of installations which blink when they are shooting. And there are these buoys marking the territory. Let’s say I’m pretty unhappy to pay for all of this.

you got to stay outside the yellow “x”es

So I was sailing clearly going around the shooting range when a navy ship approached me. They circled around me and used their loud-hailer to ask me to turn on my radio. I tried to signal that I don’t have a radio so they went on: “for your information: we are shooting today, so pass all yellow buoys, …”. Ok, so I’m paying these guys as well to annoy the fuck out of me and tell me stuff I already know. Awesome. One might think our cost savy navy would use a small, economical vessel for running parameter security. A small vessel like the ones used by local fisherman. Or like the ones of the local search and rescue (SAR). Maybe even a RIB. Nope. Meet the Todendorf Class:

IMG_2279

Y 837, the “Baumholder”

Named after this range and purpose build for running parameter security. 29 meters long, 2000hp engines, a whopping 125tons of steel. Unarmed and probably useless in combat. And from the looks of it stock maritime radar, no fancy navy stuff. Five of these were build, one sold to the Lebanese, rest still in action. What a waste building these things just for yelling at pleasure vessels/small craft.

Turning another page

Log: 210nm
Engine: 391,7h
Location: Wendtorf, Germany

Alright, I guess the prologue is about to end and we’ll enter story-mode soon. The last couple of days were spent with daysailing, training, socializing and getting stuff done. The training part is also the explanation of the increase in engine hours, the baltic is mostly “box” berths, so no jetty in parallel to your boat.

IMG_2259

box berth

It’s funny, I loved this kind of berths in training because with crew, you can hardly fail if you know the right line handling manoeuvre. No it’s taking me quite some time to get used to them because single-handing these is kinda tricky and my boat is kind of special/different with quite some prop walk and the very narrow stern.

Talking of training. I did two training trips this year, one with a very nice instructor and one with one I hate. Not my kind of guy, some stuff he teaches is ok, some is haphazard or dangerous. Oldschool drill Sargent, if you don’t succeed he yells at you until you give up or succeed. Some crew broke into tears. Totally unacceptable. Luckily that guy skippered the second trip so I had decent training before. Bad luck for the other crewmates because I had to do all tricky manoeuvres “because I did it before”. Or the skipper took over because he thought we were not skilled enough. Anyways, I liked him best when he was under deck and I was not. And him being lazy he was under deck a lot. So one day I see a boat with the ensign of my sail school. Hmm, looks like the one I did my training on. Shoddy sail trim, nobody on deck looks like an instructor, it’s Thursday so the course is almost over. Might it be W.  So I turned and ensured my sail trim was ok. And I started gaining.

IMG_2130

looksie! That’s the boat I mastered my license on…

IMG_2133

and then I overtook them. Leewards. Easily.

When I was alongside W. finally came up and we exchanged some pleasantries. At least he knows his sailboats and correctly identified my iw-31.

Some kind folks gave me very comfy cockpit cushions and one of my neighbours even fabricated some mounts for the windvane for me. Thanks guys! Hanging out in harbours is kind of weird. Seems sailing (or boating in general) is not too common for folks of my age or younger. There are few, most folks you meet are 50+ and are sailing their whole life. So I feel kind of lonely and well entertained at the same time. Sometimes it’s sort of looking at different possible “feature me”. Sometimes it’s just plain awful, like today, sitting at a bar, eating horrible food and listening to old people talking about death and different funeral options. And my phone’s battery was dead. I really hope I’ll die on my feet doing something I like. Or maybe lying down and doing something I love. Whatever, as long as I won’t just spent my days waiting for death. I hate waiting.

IMG_2155

kiel lighthouse

So yeah, did I finish all work on the boat? Nope. Is the boat ready to go? Kinda, sorta… Do I feel ready to tackle this adventure? Not really. So yeah, all in all it’s time to go. If you wait too long you’ll never get started. Having problems along the way gives you a good incentive to approach folks. Spilling the guts of whatever technical on your deck makes nice folks stop by say hello. After all travelling is the name of the game, not holidays.

(Disclaimer: I put a month worth of work and a good amount of money into the boat, mostly on safety related stuff. The vessel is a sea-worthy offshore cruiser-racer, CE Category A-rated (meaning it’s able to withstand winds with more than force 8 and waves over 4m height). People crossed the Atlantic with this thing. I’ll do short leisure sails in good weather. I’ll be fine.)

Back on track

location: Kiel Stickenhörn, Germany
log: 162nm
engine: 384.4h

Alright, the engine is running again and the forecast says the next two days might be good sailing. The only problem is that I want to travel east and the wind is currently coming from there. And there is a big navy training ground in the same direction which limits my possibilities to crisscross upwind. And since I didn’t want to pay for the maps going north or west it’s probably sea trials / running circles and not going somewhere specific. We’ll see. There is still plenty on the ToDo list but at least it seems like the work on propulsion is getting less and I can start to work on ground tackle and the solar/battery system enabling me to actually anchor out. Oh, and I’ll need some kind of dinghy.

20160531_182031

Correct old part vs. wrong new part. It’s pretty obvious the shiny one is too large, even though flange, gear and all connectors match.

Anyways, after yesterdays débâcle with the wrong starter the correct part arrived today. Kinda funny, I needed a part for a Nanni Marine Diesel. So I ordered one for a Suzuki Jeep, which came in a Kubota Box and was originally made by Mitsubishi and refurbished by Elstock. Yeah, whatever. It fits and it was cheap, at least compared to the original part (which was made by Mitsubishi as well and is a match on the part number). And I’m still waiting on the quote from Nanni. Probably somewhere between 400€ and 800€. So 120€ at a local dealership isn’t too bad, tomorrow the backup order from the interwebs arrives, 80€.

IMG_2111Changing the thing is not too bad for marine standards but still painful. The part itself is fastened by two screws. You only have to remove the alternator, hoist the engine up on one side, remove one engine mount and that is basically it. The practical thing about sailboats is that you can use the main halyard or topping lift for that, so yes, the white and black rope goes all the way up the mast, back down again and to a winch.

IMG_2124

After reassembly only the shiny solenoid shows. The rest of the starter is hidden behind other stuff

While I was on it I also repaired the temperature sensor. One contact broke off. Normally I would have just bought a new one for ten euros or so. But since this is a marine temperature sensor it costs 50€ on ebay and probably much more in a shop. So I did the obvious and cut open the enclosure to solder a piece of cable on the stump of the old contact.

IMG_2120

Fabricobbled a new contact

 

… still working on it

 Does it ever eeend? -- AvE

I finished the kiel canal without major problems. Only the starter acted up more and more. I left the engine running while waiting for the kiel holtenau lock to open. After that I stopped in the next harbour to barter a crate of beer for some spare parts. Oh, I love the interwebs for these kind of things.

Then I took of the starter solenoid, cleaned and oiled it. Still not working properly. Took of the whole starter, greased the shaft. Still not working. Took it off again, completely disassembled it and found out the free running thingy slipped (imagine your mountainbike. Normally the rear wheel hub runs freely when you are not treading and engages if you are treading allowing you to accelerate. This specimen runs freely (under load) in both directions). IMG_2118So I have to order a part. I’m still waiting for a quote from the engine manufacturer / their dealership. In the meantime I did some digging on the web. Mr. Nanni from Italy is making his marine engines from parts of Mr. Kubota, Japan. Mr. Kubota is some relative of Mr. Mitsubishi, so they sourced some of their starters there. Mr. Mitsubishi is kind of the Japanese Version of ACME, and sold the exact same starters to Mr. Suzuki and Mr. Toyota for the LJ80, SJ410 and 70ties Corolla. So you can either go to some Marine Engine Guy paying him to order at Mr.Nanni who will order at Mr. Kubota who will order at Mr Mitsubishi or somewhere else. That’s time consuming and expensive. Or you take Mr. Mitsubishis Part Number (which Mr Nanni was too lazy to scrape it off) and go to any car parts store and order from any supplier available. Cut out the middle man and remove the “marine” from the equation means great price reduction. But also great risk. Today I got a spare part which matches the part numbers only “one-way”. The delivered starter has the right gear, flange and such but is much larger. Too long and too wide. I actually went to a car part store in person, put the old starter on the counter and they ordered the new one. My starter is part number M2T30481, the delivered a replacement for M2T30581. The fun part is that my starter can always replace the other one (same oompfh, flange, … smaller envelope) and the other one can sometimes replace my starter (if there is enough space). So yeah, I was afraid to mess up the order and so paid extra to let a specialist fuck it up. Classic. Next time I might just order it online in the first place, many folks actually post pictures of the wares making it quite easy to distinguish subtle differences.

… and so it begins

Captains Log, Stardate 69864.7. We left the river Elbe through the Brünsbüttel Lock, entering the Kiel Canal. Currently berthed at Brunsbüttel Harbor. We left the influence of these weird reoccurring stream phenomena and set course to this seasons research ground: the baltic sea.

Happy Geeks Pride Day Everyone! And mind your Towels while watching Star Wars Episode IV. Quite cramed day it is. Ok, enough of that.

Today started as any well planned passage starts. I prepared everything I could and announced the ship is ready for sea. Sure, there are a gazillion of items on the ToDo list but I crossed of plenty of important stuff. So I woke up at the prepared time and my crew showed up at the time we agreed upon. Then we turned the ignition key and all we heard was the whining of a starter clutch which isn’t engaging the flywheel. No spinning flywheel means no cylinders moving meaning no combustion which renders a combustion engine useless. Tried ten or more times, just wasn’t starting. Hmm, isn’t there some item on the ToDo list for investigating the starter solenoid because it was acting up occasionally? Yep. Didn’t cross that one off. So there we were, ready to leave on the falling tide with no time to spare. And Kiel Canal legally forces you to use your engine and mostly has no wind so going under sails alone wasn’t really an option.

So we busted out the trusted special tool for non-cooperating mechanical stuff and started classic percussive maintenance. Worked like a treat and off we went.

IMG_2049

My favourite “friendly enforcer”. Metal core filled with sand for recoil reduction, hard plastic hitting surface and a long, grippy rubber handle. If you hold it on the front of the handle you can make very gentle tap-a-di-tap-tap and if you grap the handle fully you can beat the crap out of things without leaving indentation marks.

Smooth sailing from there, forgot to take pics.

I was kind of afraid of single handing the lock. Luckily S. agreed to tag along, so I had great and also very skilful company. We agreed that I would take the first try on my own and he would only engage if things went sideways. And as always, when you bring skilled folks along to help you out, the conditions are ideal, you are totally relaxed and everything goes super smooth. It is as if the situation smells that your specialist has done the thing a hundred times and so it plays nicely, hoping to fuck you up badly next time when you come alone.

IMG_2018

Some local sailor.

One last picture which pretty much sums up sailing the elbe. There is a lee shore and a pile of stones leading into the water marked by a cardinal warning sign. My instructors told us to keep well clear (100m or more) of these signs and keep a even wider berth to lee shores. These rules don’t apply here. Some say if you can sail on this river you can sail anywhere. I don’t know, I sailed around 100nm on the river, half of which alone. I did survive but it wasn’t relaxing. I had to be constantly on my toes planning my route between moving and stationary obstacles while coping with weird tidal phenomena and constant wind shifts. I’m looking forward to go there again sometime to explore the beauty of it. But for now I’ll seek out less crowded waters to take my time to actually learn how to sail. Drinking water from a firehose is kinda fun but it wears you out after some time.